Wind Turbine Working Principle





The wind turbine working principle is followed by engineers when generating power through the forces of nature. For it to work most efficiently and increase the uptime made during high velocity windy conditions, it is essential to install a strong framework that not only covers the essentials of power generation, but can also reduce the effect of damage in case of strong currents. Thus, there are certain guidelines that should be followed that are actually a formula of both the mechanics of the revolution process and the automatic reactions that are achieved through mechanical friction.

The Revolution Stage Mechanics

The first wind turbine working principle relates to the revolution process. For this, there are the blades. These are some of the most important part that aid to harness the oncoming forces by revolving in different degrees depending on the force applied and the direction they are facing. In order to increase their utility, they can have dimensions of more than 40 meters in length so that they can achieve a large spinning expanse when being revolved. They can also be able to achieve a great acceleration of more than 200km/h inĀ  their spin whenever they are down the path of the current.

The Blades and the Mechanical Stage

Blades play a part in the wind turbine principle by combining with the pillar that goes down to the generator. Every time they are revolved, they impart some mechanical energy on the middle part of the structure, which is shaped like a rod with coils upon it. These turn anticlockwise to the spin of the wing-like devices above in order to impart this energy through friction to the generator below. The latter is able to convert the sent waves into power that can be stored in terms of volts.

Wind Turbine Working

The wind turbine principle also places special importance to the mechanical friction in order to automate the whole process and stem any undue revolution during drastic changes in climate. The central rods usually revolve anticlockwise to the spin of the blades to pass on their generated force to the next rod beyond the gear kit.

The latter, which is large and connects directly to the generator, begins faster revolution. While this is beneficial in increasing the potential power generated, in certain cases if left unchecked, especially in stormy conditions, it can break down. To check on this, the machine comes with a set of braking installations in both stages of the rods, to break on any adverse speed.

The central pillar also can revolve on itself to face the whole structure towards the current instead of down its direction in order to stem on the velocity. It can also stop the mechanism through the same automatic means if need be.

Strength of the Turbine

The wind turbine principle would be incomplete without touching on the strengthening significance of the whole structure in enabling the whole process. The structure or turbine is usually laid on firm ground with a strong foundation to prop it against uprooting. In this way, it is barricaded with metal against any strong force that can cause its anticlockwise mechanism to crumble.

1 Response to " Wind Turbine Working Principle "

  1. hari says:

    I am a +2 student in have more interest in this . i like to find more detail about this wind turbine …………

Leave a Reply

Copyright © 2010 - 2014 Clean Green Renewable Energy. All rights reserved. - Privacy Policy - About Us - Site Map